Challenges and Small Experiments

Home › Forums › Module 1 · Concepts: What and Why HyFlex › Challenges and Small Experiments

Back to the programme
Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #4059
    HyComm
    Keymaster

    Name one technological, one logistical, and one pedagogical challenge you would expect in your own teaching context, and describe one small HyFlex experiment you could run in one of your courses. Reply to at least one colleague.

    How to reply so that it is useful

    Read at least one other post before you write your own, and answer it in three short parts:

    1. What works: name one specific choice in the post that would help their students, and say why.
    2. What worries you: point to one place where a learner in a different mode, especially the asynchronous one, could be left out, and suggest a fix.
    3. What you would borrow: one idea you will take into your own course, and how you would adapt it.

    Post your own contribution as text in the message field rather than as an attachment, so that colleagues can read it without downloading. This is a practice task and it is not graded; the programme team reads every thread and replies where a discussion stalls.

    #4738
    kwn0001
    Participant

    Only a few of our newer classrooms have cameras so students can see all angles of the room presents a significant hurdle for maintaining parity. Since your cohort of thirty-seven aviation students will be largely joining live online, you can leverage a student-led approach by designating one online student each week as the digital co-pilot who monitors the chat and alerts you when those remote participants have questions or need clarification. This draws on your digital literacy, as it shifts the focus from expensive hardware to effective platform management, ensuring that remote students remain visible to the room. Your first small step this week is to create a simple sign-up sheet for the co-pilot role and share it with your students to gauge their willingness to participate.

    Students making a last minute decision to either attend online or in person and being late for the class creates a fragmented experience that disrupts the flow of your leadership seminars. You can mitigate this by implementing a clear boundary policy where students must declare their mode of attendance by a set time before class, perhaps via a quick poll, and framing this as a professional readiness exercise essential for aviation industry standards. This requires an inclusive student-centred mindset, as it balances the flexibility of HyFlex with the necessity of accountability and preparation for high-stakes professional environments. Your first small step this week is to draft a brief communication for your students explaining that this attendance structure is designed to mirror the rigorous operational requirements of the aviation sector.

    How to engage those quieter students who are online and who have turned off their camera (despite being told not to) is a common barrier to building the rapport needed for later-year leadership development. Instead of mandating cameras, you could introduce low-stakes, anonymous digital whiteboards or collaborative brainstorming tools where students can contribute their thoughts on leadership case studies without the pressure of being on-screen. This draws on your adaptability, as it pivots away from visual surveillance and towards diverse, text-based methods of participation that respect student comfort while still capturing their insights. Your first small step this week is to experiment with a free, simple digital polling or post-it board tool to see which interface encourages the most participation from your quieter students.

    Providing a reliable digital co-pilot is the most essential first step, as it immediately addresses the primary concern of your majority-online cohort and establishes a culture of collaborative engagement.

    #4739
    kwn0001
    Participant

    This is the experiment it gave me that I can easily use, “To address the challenge of remote students feeling disconnected and invisible in a room without advanced camera arrays, we will trial the digital co-pilot role. This experiment focuses on delegating the monitoring of the virtual space to a student representative, ensuring that the voices of those joining remotely are integrated into the live classroom discussion. Your first action today is to post a brief announcement on your virtual learning environment inviting volunteers to act as the inaugural co-pilot for next week’s seminar.”

    #4746
    selma.kasimay
    Participant

    Connection can drop; I may not balance my addressing both modes and most probably, ı wont find any students in person. All will be online.

    #4814
    rnekaka2023
    Participant

    Our internet connectivity is poor and some students lack equipment like laptops or good smart phones, which makes relying on high-bandwidth synchronous video conferencing a significant risk for your postgraduate cohort. To mitigate this, shift your core delivery to an offline-first model where session materials are curated as downloadable, low-data document packages or narrated slide decks available on the virtual learning environment well before the session. This relies on your digital literacy, as you must learn to compress files and prioritise accessible formats over rich media to ensure equitable access regardless of connection quality. Your first small step this week is to audit one of your upcoming lecture decks and save it as a PDF with audio-over-slides to test its file size and accessibility.

    Shortage of teaching staff creates a bottleneck when trying to facilitate simultaneous in-person and remote engagement, so you should consider leveraging your postgraduate students as peer facilitators or moderators who rotate the responsibility of monitoring the chat or capturing key discussion points for the asynchronous group. This draws on an inclusive student-centred mindset, as it empowers the cohort to take ownership of their collective learning community while reducing the burden on you to be in two places at once. Your first small step this week is to draft a brief announcement for your next session, inviting two students to volunteer as digital ambassadors to help manage the flow of contributions from remote peers.

    Challenge with timetabling that covers all modes often leads to fragmented learning, so I suggest implementing a modular, asynchronous-led structure where the live sessions serve strictly as consolidation or collaborative workshops rather than primary content delivery. This requires high levels of adaptability, as you must move away from the traditional lecture format to design activities that function equally well whether a student is sitting in your room, dialling in from home, or engaging via a discussion forum later in the week. Your first small step this week is to identify one core learning outcome from your next unit and map out how a student could achieve it through a short reading and a directed forum task, bypassing the need for a live lecture entirely.

    I would tackle the challenge of the internet connectivity and equipment shortages first, as ensuring that your postgraduate students have reliable access to your core content is the essential foundation upon which all other pedagogical and logistical strategies must be built. Providing more detail on the specific software currently used for your virtual learning environment would help me tailor these strategies even more effectively in our next consultation.

    #4815
    rnekaka2023
    Participant

    To address your connectivity and equipment challenges, your experiment will focus on a low-bandwidth, asynchronous-first delivery model for your postgraduate Teaching and Learning methods course. By shifting your core content into downloadable, text-based document packages, you ensure that students with unreliable internet or limited hardware can engage with the material at their own pace without the pressure of a live video stream. Your first action today is to take your next lecture deck and export it as a compressed PDF, supplementing it with a brief, text-only guide or a short audio summary that can be downloaded in seconds.

    Over the next four weeks, you will trial this approach by releasing these curated packages on your virtual learning environment forty-eight hours before your scheduled session. During the first two weeks, monitor which students download the materials and note any technical queries they raise regarding file accessibility. In weeks three and four, use your scheduled live time exclusively for collaborative workshops or peer-led discussions that build upon the pre-released content, rather than re-teaching the lecture material. This structure allows you to support those who are physically present while ensuring that those engaging remotely are not disadvantaged by a lack of real-time streaming.

    To judge the success of this trial, look at the engagement levels of your asynchronous materials compared to your previous live-streamed lectures. You might track the number of students who contribute to a follow-up discussion board or the quality of their reflections in the workshop, as these indicate whether the offline content was sufficient for them to grasp the core concepts. If you observe that students arrive at the workshop prepared and able to discuss the unit topics effectively, you can consider the low-bandwidth model a success.

    If this approach works, the natural next step is to refine your document packages by adding guided reflection prompts that encourage students to connect the theory to their own professional practice. Should the experiment fail to generate sufficient engagement or if students report feeling disconnected from the course, the honest fallback is to return to a hybrid model where you record a short, high-quality audio summary of the key lecture points, which provides the personal touch of your voice without the data-heavy requirement of live video. Providing more specific details on the current average file size of your lecture decks would help refine the technical parameters of the next run.

    #4824
    margasha2
    Participant

    The technological challenge of the lecture room having no fixed camera is best addressed by using my own mobile device as a document camera or a roving webcam. I can mount my phone on a small, inexpensive tripod or even a stack of books to focus on anatomical models or hand-drawn sketches, sharing the view through the meeting software to ensure remote students see the same structural details as those in the room. This draws on my digital literacy, as I repurpose everyday hardware to bridge the visual gap for an anatomy cohort that relies heavily on spatial understanding. My first small step is to test the framing of a single model using your phone’s camera during a quiet moment in the teaching space this week.
    The logistical challenge of timetabling all three groups for a first-year cohort of fifty is managed by standardising my core activities so that the learning outcomes remain identical regardless of the access point. By creating a modular schedule where the first twenty minutes of every session are dedicated to a pre-recorded foundational concept accessible to everyone, I remove the pressure to synchronise three distinct delivery styles simultaneously. This approach relies on an inclusive student-centred mindset, as it prioritises consistent access to high-quality content over the complexity of real-time management. My first small step is to sketch out a recurring weekly rhythm where one core activity is explicitly designed to be completed in the same way by all students, regardless of their attendance mode.
    The pedagogical challenge of carrying out discussions virtually for this large group can be solved by utilising a digital backchannel or live collaborative document where students post questions and annotate anatomical images in real time. Because my students are primarily attending in person, I can project this live feed onto the main screen, allowing the remote participants to contribute their questions and observations alongside their peers in the room. This draws on your adaptability, as you are shifting the discussion from a verbal-only format to a hybrid, text-based dialogue that captures the insights of the entire group. My first small step is to set up a shared digital board or document with one prompt related to a specific anatomical system and invite students to add a single comment to it before my next session.
    I would tackle the technological challenge first because establishing a reliable visual link to your anatomical models is the foundation upon which my students’ ability to follow the course content depends.

    #4825
    margasha2
    Participant

    experiment
    To address the technological challenge of lacking a fixed camera, your pilot experiment will focus on creating a reliable visual link between your anatomical models and your predominantly in-person cohort. Your first action today is to set up a small tripod or stable base on your desk and use your mobile device to frame a single anatomical model, ensuring the image is clear and well-lit when projected via your meeting software. This establishes the baseline for remote students to see the same structural details as those sitting in the lecture hall, effectively bridging the distance gap.
    For the next four weeks, you will integrate this mobile camera setup into your existing lecture structure. In week one, you will use the phone camera for a five-minute segment to demonstrate a specific joint or bone structure, checking the clarity with a remote student via the chat function. In week two, you will extend this to a fifteen-minute demonstration, moving the camera to show different angles of the model. By week three, you will incorporate the live feed into a full demonstration, and in week four, you will ask a student in the room to assist in adjusting the framing, testing the setup’s ease of use during a live session.
    To judge if this experiment works, you will simply monitor the participation of your remote students during these demonstrations. Keep a brief tally of how many questions or observations are posted in the meeting chat specifically related to the anatomical features shown on camera. If the number of relevant questions from remote students increases or remains consistent with the engagement levels of those in the room, you have succeeded in providing an equitable visual experience. You do not need formal surveys, as the volume of subject-specific interaction serves as a direct indicator of whether your remote cohort feels included in the visual learning process.
    If the experiment proves successful, your natural next step is to refine the lighting or perhaps introduce a second camera angle for more complex anatomical systems. If the technical friction proves too high or the remote students struggle to follow the feed despite your efforts, your honest fallback is to record a high-quality, pre-produced video of the model demonstration before the session and share that link at the start of the class. This maintains the pedagogical integrity of the lesson while removing the immediate pressure of managing live hardware during your teaching time.
    Providing a specific, recurring time slot during your lectures for this camera setup would most improve the next run of this experiment.

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.